TE Connectivty’s (TE) ERNI VolTron 1,000 V high-voltage sensing connector is specifically designed for use in the battery management system (BMS) and battery disconnect units (BDU) to measure voltage across the battery architecture and ecosystem. The connector´s multiple design features, high CTI materials, and contact surfaces maximize creep and clearance. This results in high performance up to 1,000 V, strong dielectric strength, and the capacity to be used 5,000 m above sea level with a pollution degree of 2 according to IEC 60664-1. The connector complies with LV214, LV215, and USCAR automotive standards.
Features
- Up to 1,000 V signal measurement capability
- Miniaturization grade with a low profile
- CTI 600 materials and Au terminal contact surface
- 5,000 m altitude compensation
Benefits
- Increased voltage in battery architecture
- Reduced connector height provides more freedom for the design of compact BMS
- Suitable to use in harsh environments and automotive standards
Mechanical
- Vibration severity SG2 (LV214)
- SMT termination
- MaxiBridge crimp contact (LV214 and SMBT approved)
- Primary and secondary locking
- Two-color and mechanical codings
Electrical
- Up to 1,000 V operating voltage
- Dielectric strength 2.500 V (LV215)/3.700 V
- Terminal rated up to 6 A (0.35 mm²)
- 500 mating cycles
Material
- CTI 600 resins
- UL 94 V-0 flammability resistance
- Gold surface contacts
- Temperature range: -55°C to +150°C
Standards
- LV214
- LV215 (VW80332)
- USCAR 37
Specifications
- 108-94917 product specification
- 108-94917-1 product specification
- 114-94917 application specification
Applications
- Battery management systems (BMS) and battery disconnect units (BDU)
- Integrated power electronics
- Applications where high voltage needs to be measured constantly