Product Highlights

The Texas Instruments LMG5126 converter has a programmable switching frequency from 300 kHz to 2.5 MHz, and a resistor-based configuration that simplifies design without firmware.

Texas Instruments F28P65x C2000 real-time microcontroller family delivers a total processing power equivalent to 1000 MHz Arm® Cortex®-M7 based device on real-time signal chain performance.

The Texas Instruments TLV2888 family of wide-bandwidth, low-noise, zero-drift op amps feature 15 µV offset voltage (max) and 0.05 µV/°C offset voltage drift (max).

Texas Instruments 32-bit MSPM0L111x 32MHz Arm® Cortex®-M0+ MCU mixed-signal microcontrollers feature up to 128 KB of Flash memory with ECC.

Red Pitaya STEMlab boards combine Texas Instruments ADC/DACs with FPGA processing for signal acquisition, generation, and real-time control in RF, photonics, and test.

Texas Instruments MSPM0G5187 NPU Arm® 32-bit Cortex®-M0+ CPU with memory protection unit and frequency up to 80 MHz.

Texas Instruments C64x+™ devices are upward code-compatible from previous devices that are part of the C6000™ DSP platform.

Texas Instruments TMP411 and TMP411D devices are remote temperature sensors with a built-in local temperature sensor.

Explore Texas Instruments centralized hub of analog and embedded design resources, expert-written content and comprehensive trainings.

The Texas Instruments OPA141, OPA2141, and OPA4141 family is a series of low-power JFET input amplifiers that feature good drift and low input bias current.

Texas Instruments LM35 series are precision integrated-circuit temperature devices with an output voltage that is linearly proportional to centigrade temperature.

The TCA9548A device from Texas Instruments has eight bidirectional translating switches that can be controlled through the I²C bus.

Texas Instruments TPSM82830x step-down power modules offer an integrated inductor in QFN and MagPack™ packages.

Texas Instruments TXS0108E series 8-bit bidirectional voltage level shifters offer two separate configurable power supply rails for open-drain and push-pull applications.

Texas Instruments BQ41Z50 battery fuel gauge and protector provides overvoltage, undervoltage, overcurrent, short-circuit, and overtemperature protection.

Texas Instruments CC2340R SimpleLink™ 2.4 GHz Wireless MCU with 512 KB Flash features an optimized 48 MHz Arm® Cortex®-M0+ processor.

The Texas Instruments AM2612 dual-core Arm® Cortex®-R5F operates at up to 500 MHz and is engineered for flexibility.

Texas Instruments LMG2100R044 100 V, 35 A GaN half-bridge power stages offer integrated drivers for compact, high-speed applications.

Texas Instruments AM263Px Sitara™ Arm® MCUs meet the complex real-time processing needs of next-generation industrial and automotive embedded products.

Texas Instruments and Würth Elektronik TIDA-1606 inverter and PFC reference design demonstrates a bidirectional SiC-based active front end (AFE) inverter and PFC stage.